manualshive.com logo in svg

Kontron CP3002, Руководство пользователя

Поделиться
Скачать
Kontron CP3002 Скачать руководство пользователя страница 2

Preface

CP3002

Page ii

ID 1042-9252, Rev. 2.0

P R E L I M I N A R Y

Revision History

Imprint

Kontron Modular Computers GmbH may be contacted via the following:

MAILING ADDRESS

TELEPHONE AND E-MAIL

Kontron Europe GmbH

+49 (0) 800-SALESKONTRON

Sudetenstraße 7

[email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet web site:
www.kontron.com.

Disclaimer

Copyright © 2012 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.

Publication Title: CP3002: 3U CompactPCI Processor Board based on the Intel® Core™

i7 Processor with the Intel® QM57 Chipset

Doc. ID: 1042-9252

Rev.

Brief Description of Changes

Date of Issue

1.0

Initial issue

19-Jan-2011

2.0

General update, added description for the Intel® Core™ i7-660UE 
and the Intel® Celeron® U3405 processors.

27-Jul-2012

Содержание CP3002

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды