Kontron CP-RIO6-001, Руководство пользователя

Страница: 33 / 52

CP-RIO6-001/-DD-216/-HD/-HD-216 Functional Description
ID 1043-5620, Rev. 2.0 Page 2 - 5
2.1.2 Digital Video Interfaces
The CP-RIO6-001/-DD-216/-HD/-HD-216 provides up to two digital video interfaces with sup-
port for HDMI and DVI signaling depending on the CPU board and the monitor capability.
The CP-RIO6-001 and CP-RIO6-001-DD-216 rear I/O modules provide two digital video inter-
faces implemented as two 29-pin DVI connectors, J9 and J11, which allow for simultaneous
connection of two digital monitors. This feature is referred to as dual head support.
The CP-RIO6-001-HD and CP-RIO6-001-HD-216 provide one digital video interface
implemented as one 29-pin DVI connector, J9, for connecting a digital monitor.
Figure 2-3: DVI Connectors J9/J11
The following table indicates the pinout of the DVI Connectors J9/J11.
Table 2-3: DVI Connectors J9/J11 Pinouts
PIN SIGNAL DESCRIPTION I/O PIN SIGNAL DESCRIPTION I/O
1 TMDS Data 2- TMDS* Link - O 2 TMDS Data 2+ TMDS* Link + O
3 GND Ground -- 4 NC Not connected --
5 NC Not connected -- 6 DDC Clock
I
2
C™ Clock
O
7 DDC Data
I
2
C™ Data
I/O 8 NC Not connected --
9 TMDS Data 1- TMDS Link - O 10 TMDS Data 1+ TMDS Link + O
11 GND Ground -- 12 NC Not connected --
13 NC Not connected -- 14 VCC Power +5 V, 0.5A fused --
15 GND Ground -- 16 HPDETECT Hot Plug Detect I
17 TMDS Data 0- TMDS Link - O 18 TMDS Data 0+ TMDS Link + O
19 GND Ground -- 20 NC Not connected --
21 NC Not connected -- 22 GND Ground --
23 TMDS Clock + TMDS Link + O 24 TMDS Clock - TMDS Link - O
C1 NC Not connected -- C2 NC Not connected --
C3 NC Not connected -- C4 NC Not connected --
C5 GND Ground --
1
8
C1
C2
C5
17
24
C3
C4