P R E L I M I N
A R Y
22
www.kontron.com
User Guide
COMe Ref. Carrier-i T6 TMI
The Ethernet connector LEDs have the following states:
LINK (green):
Ethernet Link
ACT (green):
1000BASE-T Ethernet Speed
ACT (yellow):
100BASE-TX Ethernet Speed
ACT (off) + LINK (on): 10BASE-T Ethernet Speed
Note:
The RJ45 Ethernet connector, J20, and the Intel® Ethernet Controller I210-IT, U29, are
available as a standard feature on the COMe Ref. Carrier-i T6 TMIV (Value) and the COMe
Ref. Carrier-i T6 TMIP (Professional) versions.
2.3.5 USB 2.0 Interfaces
The COMe Ref. Carrier-i T6 TMI supports eight high-speed USB 2.0 interfaces used as host:
»
USB#[0;1] are used for USB 3.0/2.0 double-stack connector, J11.
5V standby power for wake events may be enabled and disabled via the onboard DIP switch,
SW1.
»
USB#[2;3] are used for USB 3.0/2.0 pin header, J7
»
USB#[4;5] are routed to the USB 2.0 double-stack connector, J10.
5V Standby Power for wake events may be enabled or disabled via the onboard DIP switch,
SW1.
»
USB#6 is used for the Mini PCIe half-size interface to enable usage of USB 2.0 high-speed
Mini PCIe form factor devices.
»
USB#7 is used for the Mini PCIe full-size / mSATA interface to enable usage of USB 2.0 high-
speed Mini PCIe form factor devices.
