
16
www.kontron.com
User Guide
COMe Ref. Carrier-i T10 TNI
1.5 Standards
This product complies with the requirements of the following standards.
Note:
Customers desiring to perform further environmental testing of the COMe Ref. Carrier-i T10
TNI must contact Kontron for assistance prior to performing any such testing.
Boards
without conformal coating
must not be exposed to a change of temperature which
can lead to condensation, as it may cause irreversible damage especially when the board
is powered up again.
Kontron does not accept any responsibility for damage to products resulting from destruc-
tive environmental testing.
Table 5: Standards
TYPE
ASPECT
STANDARD
REMARKS
CE
Emission
EN61000-6-3, EN55022
--
Electrical Safety
Directive 2014/35/EU
Low Voltage Directive (LVD)
EN60950-1
--
Product Safety
Directive 2001/95/EC
General Product Safety Directive
EMC
Directive 2014/30/EU
Electromagnetic Compatibility
Environmental
Climatic Humidity
IEC60068-2-78 (see note below)
--
WEEE
Directive 2002/96/EC
Waste electrical and electronic
equipment
RoHS 2
Directive 2011/65/EU
Restriction of the use of certain
hazardous substances in electri-
cal and electronic equipment
Environmental
Vibration
(Sinusoidal)
IEC60068-2-6
Test parameters:
9-150 (Hz) frequency range
1 (g) acceleration
1 (oct/min) sweep rate
10 cycles/axis
3 axes
Single Shock
IEC60068-2-27
Test parameters:
15 (g) acceleration
11 (ms) shock duration half sine
3 number of shocks per direction
(total: 18)
6 directions
5 (s) recovery time