Kontron Hamburg GmbH & Co.KG
Marschnerstieg 7
22081 Hamburg / Germany
Fon: +49 (0)40 20 00 90-0
Fax: +49 (0)40 20 00 90-10
http://www.kontron-hh.com
CRT
to
LCD-6-SM
15.04.2004
Page 15 of 18
1.7
Technical Specification
These values were measured with OSD-Panel attached and without
flatpanel and backlight inverter.
- Supply voltage at 25
˚
C :
Minimum supply voltage : + 11,4 V DC
Typical supply voltage : + 12,0 V DC
Maximum supply voltage : + 12.6 V DC
- Typical Input current at 25
˚
C :
CRT
to
LCD-6-SM with input signal (XGA) : 250 mA
CRT
to
LCD-6-SM with powerdown : 45 mA
CRT
to
LCD-6-SM without input signal : 65 mA
-
Supply voltage ripple :
100 mV peak to peak 0 – 20 MHz
- Current Rating of the output circuits:
PANEL_VCC ( 12V, 5V or 3.3V ) : 2A
Backlight Power for XGA-Flatpanel (5V or 12V) : 2A
Backlight Power for SXGA-Flatpanel 5V = 2A, 12V = 2,5A
If ( Panel_VCC = 5V and Backlight Power = 5V ) =
2,5A – Panelcurrent = max. Backlight current
VGA connector signals :
Sync input voltage low : 0.8 V
Sync input voltage high : 2.4 V
RGB input voltage : 0 – 0.7 V with 75 Ohm external termination
RGB input current : 0 – 5 mA
-
Temperature :
Ambient : 0
˚
C – 60
˚
C (*1)
Non operating : - 10
˚
C – 85
˚
C
(*1) The maximum temperature on the module surface can exceed above
mentioned ambient temperature. It is the user responsibility to keep this
temperature within the above specification.
- Thermal gradient :
operating : 25
˚
C per hour
non-operating : 40
˚
C per hour
-
Relative Humidity :
operating : 10% - 90 % RH non-condensing
non operating : 5% - 95% RH non-condensing
- Mechanical :
Shock : 50G/20ms square wave maximum
Vibration : 1G/0-600Hz, dwell not to exceed
- Altitude :
operating : 0 – 3000 m
non-operating : 0 – 5000 m
-
Dimensions of the printed circuit board :
Width : 70.00 mm
Length : 162.40 mm
Thickness : 1.00 mm
-
Dimensions of the module :
Width : 70.00 mm
Length : 162.40 mm
Height : 7.00 mm
