Kontron Hamburg GmbH & Co.KG
Marschnerstieg 7
22081 Hamburg / Germany
Fon: +49 (0)40 20 00 90-0
Fax: +49 (0)40 20 00 90-10
http://www.kontron-hh.com
CRT
to
LCD-6-SM
15.04.2004
Page 10 of 18
1.4.5
DC power supply
X3 for XGA - Flatpanel
Apply operating voltage using connector X3.
Connector: YeonHo 40006WR-02A00
Matching Connector: YeonHo 40006HS-02
Pin Name
Description
X3
O
1
GND
Power Ground
O
2
+12V In
+12 V DC Power In
1.4.6
DC power supply
X3 for SXGA-Flatpanel
Apply operating voltage using connector X3.
Connector: Hirose DF3D-2P-2H
Matching Connector: Hirose DF3-2S-2C
Pin Name
Description
X3
O
1
GND
Power Ground
O
2
+12V In
+12 V DC Power In
1.4.7
Backlight and flatpanel power configuration
This configuration is only valid for X4 and X5.
Short pins R15 or R16 or R17 or R24 or R26 to choose required
voltage supply.
Caution !
Only one configuration for backlight and flatpanel is
allowed, otherwise the board is permanently damaged.
Resistor
Name
Description
Delivery
Default
R15
+12V
+12V DC Power for flatpanel power
Open
R16
VCC
+ 5V DC Power for flatpanel power
Short for 5V DC
Flatpanel
R17
+3,3V
+ 3.3V DC Power for flatpanel power
Short for 3.3V
Flatpanel
R24
VCC
+ 5V DC Power for backlight power
Open
R26
+12V
+12V DC Power for backlight power
Short
1.4.8
Backlight control configuration
Use to control polarity of backlight control signal of X5
R23 Short
R22 Short
Delivery Default
/BLON BLON
R23 open
R22 Short
Never short R23 and R22 at the
same time! This will cause damage
to the system!
