Kontron AdvancedTCA AT8050, Руководство пользователя

Страница: 56 / 165

40 AT8050
www.kontron.com
4.3 IPMC
4.3.1 Supported commands
The table below lists the IPMI commands supported by the IPMC. This table is identical as the one provided by
AMC.0 and PICMG 3.0. The last column states the Kontron support for the specific command.
Table 4-1:IPM Device Supported Commands for IPMC
Table 4-2:Watchdog Timer Supported Commands for IPMC
Table 4-3:Device Messaging Supported Commands for IPMC
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC req. Kontron support
on IPMC
IPM Device “Global”
Commands
M M
Get Device ID 20.1 App 01h M M Yes
Cold Reset 20.2 App 02h O O Yes
Warm Reset 20.3 App 03h O O No
Get Self Test Results 20.4 App 04h M M Yes
Manufacturing Test On 20.5 App 05h O O Yes
Set ACPI Power State 20.6 App 06h O O Yes
Get ACPI Power State 20.7 App 07h O O Yes
Get Device GUID 20.8 App 08h O O Yes
Broadcast “Get Device
ID”
20.9 App 01h O/M M Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req. Kontron support
on IPMC
BMC Watchdog Timer
Commands
M M
Reset Watchdog Timer 27.5 App 22h M M Yes
Set Watchdog Timer 27.6 App 24h M M Yes
Get Watchdog Timer 27.7 App 25h M M Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req. Kontron support
on IPMC
BMC Device and
Messaging
Commands[5]
M O
Set BMC Global Enables 22.1 App 2Eh M O/M Yes
Get BMC Global Enables 22.2 App 2Fh M O/M Yes
Clear Message Flags 22.3 App 30h M O/M Yes