Konsberg mPAP 201-C, Инструкция по эксплуатации

Страница: 17 / 48

494326/A
17
Converting from fibre optical to electrical
signal
The converter works both ways and can be used to create an optical isolation between
high voltage equipment and a transceiver.
Context
You need one kit for each responder signal. Connectors are included to lengthen the
cable if needed.
Procedure
1 Produce the cable from the responder driver unit to the converter in accordance
with drawing 308850 in the drawing file chapter. The connectors are included in
the converter kit.
2 Secure the cable and connect it.
3 For an optical isolation, produce the cable from the converter to the ROV in
accordance with drawing 308850 in the drawing file chapter. The connector is
included.
4 Secure the cable and connect it.
5 Continue with fibre optical or electrical cables as needed.
Installation