Konig CMP-POWG20, Руководство пользователя

Страница: 2 / 102

2
ENGLISH
Surge protected distribution board
Thank you for purchasing this innovative product, which is designed to reduce both stand-by power
wastage & energy costs. Stand-by power has always been around us. Many consumers often think
that their appliance is off. In fact, it is still standing by and still consuming power. This product provides
an easy & efficient way to manage power outlets and stop stand-by power wastage.
The system consists of two parts, a USB Transmitter and a Surge Protector. When a USB Transmitter
is connected to any particular device (USB port), it detects power in the USB port and wirelessly
controls the “POWER SAVE outlets” on the Surge Protector accordingly.
These conditions apply when you turn on the device; the USB Transmitter will wirelessly turn on the
“POWER SAVE outlets” on the Surge Protector. When you turn off the device, the USB Transmitter will
wirelessly turn off the “POWER SAVE outlets” on the Surge Protector. As a result, the stand-by power
wastage is efficiently reduced.
The Surge Protector also provides advanced surge protection & power filtration to protect your
electronic equipment from power surges & voltage spikes. And power filtration cleans the AC
contamination and improves the performance of connected electronic equipment. The Wireless Green
Control Surge makes a great companion for everyday energy conservation and surge protection.
Features:
USB TRANSMITTER
□ Learning and Grouping capability.
- One USB Transmitter can group with multiple Surge Protectors by learning capability.
- Pre-learn the USB Transmitter with Surge Protectors at home and in the office.
Enjoy the convenience of carrying just one pocket size USB Transmitter to control Surge
Protectors at both locations.
□ Stand-alone wireless remote function.
- The USB Transmitter can be used as a stand-alone wireless remote to turn the “POWER SAVE
outlets” on the Surge Protector on or off.
SURGE PROTECTOR
□ Controlled by the USB Transmitter, the POWER SAVE outlets on the Surge Protector automatically
switch on or off to eliminate unnecessary energy wastage.
□ Advanced Surge Protection protects your electronic equipment from surges and voltage spikes.
□ EMI/RFI Noise Filtration eliminates the interference and improves the performance of your
electronic equipment.
Installation:
USB TRANSMITTER WIRELESS RANGE
In open space, the USB Transmitter has a wireless range of up to 25 feet* to control the Surge
Protector. Actual range may vary depending on environmental conditions, interference and building
materials.
REPLACING THE USB TRANSMITTER BATTERY
One 3V CR1632 Lithium battery is included and pre-installed in the USB Transmitter.
When the button on the Transmitter is pressed, a red LED will illuminate to indicate that the
Transmitter is working and the battery is OK. If the LED light goes very dim or does not illuminate, it is
time to replace the battery*.
□ The only battery that can be used in the USB Transmitter is a 3V CR1632 flat type Lithium battery.