DJ-Table »Suspensor« 42080
-42080.000.55-
-03.80.822.00- 2/04
1. What all the DJ-Table provides
-Ideal for two turntables and a mixer. If space and weight are still available, additional DJ-
equipment can also be supported.
-Spring-mounted supporting plates protect the system against impacts and vibrations. Four
spring elements each per plate are preinstalled. Up to six other spring elements can be
mounted. Fully equipped with all twenty springs, each of the two supporting plates bears up
to 25 kg. Those who overtax the table with more weight will rob themselves of its special
advantages: The supporting plates might sag and, most importantly, the suspension will no
longer function.
-Spaciously dimensioned supporting plates (together: 161 cm x 49 cm)
-Adjustable height (min. 77 cm / max. 115 cm)
-Secure stand provided by floor compensation screws
-Very good workmanship
-Spare parts supplied
-Compact transportation unit (60 x 16 x 85 cm; 24 kg)
2. Information on Safe Operation
-Assemble with suitable installation materials.
-Max. load capacity of 25 kg per supporting plate
-Adjust the suspension to the weight.
-Only for DJ-equipment
-Hinge 5: Caution: DANGER OF GETTING PINCHED!
-Snap-in lock 9 has to be snapped in when in use
-The legs have to be bolted to the frame with the locking nuts 4.
-Even out any unevenness in the floor using the floor compensation
screws 19.
-The shaft ends 25 of screws 21 have to project into the leg tube 20.
max.
25 kg
max.
25 kg
max.
25 kg
max.
25 kg
24 mm (max. travel of spring)
169 cm
161 cm
181 cm
49 cm
60 cm
60 cm
85 cm
16 cm
max. 115 cm
min. 77 cm
Page 1
