Material
Metal parts: Aluminum, black
Plastic parts: PA, rubber, black
Components
microphone or other accessories with the proper
connector threads;
please refer to the microphone stand information
Dimensions
External Dimensions: 32 x 26.5 x 51.5 mm
Weight
0.05 kg
Accessories
(optional)
Microphone clamps 85035/50/55/60
Thread adapter 215, 217, 219, 85040 etc.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
23910-000-55 Rev.9 03-79-115-00 3/16
upper
section
lower
section
1
4
5
6
7
8
2
3
TECHNICAL DATA / SPECIFICATIONS
USE
3/8"-5/8" REDUCING THREAD ADAPTER
CHECK, MAINTENANCE, CLEANING
23910 Quick-Release Adapter
It’s very easy to use:
- Remove the adapter: Squeeze the quick release button and remove the upper section
- Mount the adapter: Slide the upper section onto the lower section
- The adapter does not have to be tightened after it has been mounted
- No tools required
- 3/8" and 5/8" threads are available
SAFETY NOTES
Thank you for choosing this product.
The instructions provide directions to all of the important set up and handling
steps. We recommend you keep these instructions for future reference.
ASSEMBLY
1
Screw the adapter onto the threaded end of the mic. stand
2
First remove the upper from the lower section. To do this:
2
a. Hold the microphone stand tube,
2
b. Squeeze the knurled quick release buttons and...
2
c. ...remove the upper section.
3
The upper section is now screwed onto a microphone
3
ora microphone clamp or a different accessory with a
3
3/8" connection.
Generally the lower section stays on the microphone stand
and the upper section on the microphone. Instead of screw-
ing the parts on and off, the parts are placed on the pin.
4
Now the upper section (with the microphone etc.) is slid
4
onto the lower section.
5
Then turn the upper section clockwise to lock it into
5
place. This ensures that the pin locks into one of the
5
eight holes thus securely connecting the upper and
5
lower sections.
DIASSEMBLY
if the upper and lower sections are to
remain on the microphone i.e. stand. NOTE: Ensure that
the stand can bear the weight Stativ verbleiben sollen.
6
Squeeze the knurled quick release buttons on both
6
sides and pull the upper section (including microphone)
6
from the lower section.
3
Unscrew the microphone from the upper section.
2
Unscrew the lower section from the stand.
1
Stick the upper and lower sections together (secure by
1
turning).
7
DIMENSIONS
- Please inspect the threads for damage prior to use
- Prior to screwing on the assembly remove the upper section: see
1
- Screw the lower section onto the threaded end of the microphone stand
- Lock the upper section (threaded sleeve) into the lower section: see
5
- Please read the microphone stand safety notes
The lower section comes with a reducing thread adapter
(3/8"-5/8").
8
The reducing thread adapter can be removed using a
8
coin The Quick-Release-Adapter then fits onto a stand
8
equipped with a 5/8"-threaded connector.
For other microphone connector sizes (e.g. 1/2") we
recommend that you take a look at our K&M Product Line,
www.k-m.de Search: reducing thread adapter
- To care for the product use a damp cloth and a
-
non-abrasive cleaning agent
