Storage, disposal
Store the tablet PC stand holder in a dry place.
Recycle disassembled components:
u
Scrape all components made of metal.
u
Recycle or reuse all plastic, paper, and cardboard components.
u
Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: [email protected]
Web: www.k-m.de
19766-000-55 Rev.05 03-80-509-00 11/21
Fault and troubleshooting
Fault/cause
Check/Remedy
Tablet cannot be clamped
in the holder
● Check the clamping range, if necessary adjust the clam-
●
ping range on the slider with the help of the second hole.
Tablet PC holder is unstable or
wobbles
● Check the screw connections and retighten if necessary.
Maintenance, cleaning and repair
u
Maintenance:
Regularly check if the screw connections are tight.
u
Cleaning:
Use a slightly damp cloth to clean the tablet PC stand holder. Do not use chlorina-
u
ted or abrasive cleaning agents. These can cause damage to the surface and varnish.
u
Repair:
Immediately repair any damage that occurs and stop using the tablet PC stand holder.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u
spare parts list by entering the article number. Use this page to reorder missing or damaged
u
components.
