background image

TECHNICAL DATA

F. DIMENSIONS

 

STAND

 

- Total height:               1260 mm 
- Support height:          800 mm 
- Square base:             420 x 420 x 38 mm 
- Base tube:                 ø 76 x 735 mm 

 

MATERIAL 
- Base:                         Grey cast iron, felt 
- Base tube:                 Steel 

 

SURFACE                    structured black (-56) 

                                    structured white (-66) 
                                    powder-coated  

 

WEIGHT                      11.7 kg

 

DISPENSER HOLDER

 

- Hole pattern for mounting dispensers: 

-

 a. 500 ml:                   40-51 x 169 mm 

-

 b. 1000 ml:                 40-51 x 203 mm               

- Drip cup:                    ø 70 x 47 mm 

 

MATERIAL 
- Bracket:                     Steel 
- Drip cup:                    Polyamide 

 

SURFACE                    structured black (-56) 

                                    structured white (-66) 
                                    powder-coated

 

DISPENSER

 

Elbow dispenser with removable PET bottle 
- Dimensions:               W x D x H = 83 x 160 x 243 mm 
- Bottle content:           volume = 500 ml 
MATERIAL                   aluminum, steel, ABS, PET 

 

WEIGHT overall:          13.5 kg 

INSTALLATION INSTRUCTIONS

D. MOUNTING of the DISPENSER

 

3 - HOLE PATTERN FOR DISPENSER MOUNTING

 

3.1

 for 500 ml - bottles (included in delivery) 

3.1

 - 3 holes  á ø 5 mm  

3.1

 - Distance: 40 mm horizontal / 169 mm vertical  

3.2

 Different from this, dispensers for 1000 ml - bottles  

3.2

 can be mounted if required: 

3.2

 - 3 holes á ø 5 mm 

3.2

 - Distance: 40 mm horizontal, 203 mm vertical 

3.3

 for special sizes: 

3.3

 - Distance: bis 51 mm horizontal, 214 mm vertical 

 

4 - MOUNTING the REAR PANEL of the DISPENSER

  

4.1

 Remove the white rear panel from the dispenser  

4.1

 housing... 

4.2

 ...and screw it onto the dispenser holder: 

4.2

 - 

e.1

 lock nuts M5 / SW8 (DIN985) 

4.2

 - 

e.2

 washers ø 5,3 mm 

4.2

 - 

e.3

 screws M5 x 16 mm (Phillips screw Z2) 

4.3

 The rear panel has three points that fix the dispenser  

4.3

 housing: 

4.3

 

X

 - Slot: holds right and left rail 

4.3

 

Y

 - Nose: presses against the rear panel of the housing 

4.3

 

Z

 - Pin: plunges into upper transverse rail 

 

5 - ATTACHING the DISPENSER HOUSING

 

5.1

 Attach the housing and push the side rails approx.  

5.1

 2 cm into the slots 

X

 in the white rear panel. 

5.2

 Now press the housing against the nose 

Y

  

5.2

 of the rear panel as far as it will go and... 

5.3

 ...immediately push down until the upper transverse  

5.3

 rail is fixed behind the pin 

Z

 of the rear panel 

 

6 - HANDLING the DISINFECTANT BOTTLE 
6.1

 Grip the bottle at the bottom and pull it forward until  

6.1

 it no longer rests on the mounting bracket 

6.a

6.2

 Slowly pull the bottle down until the suction hose is  

6.2

 no longer immersed. 

6.3

 Now fill the bottle with suitable contents: 

6.3

 - gel, - disinfectant, - soap, - shampoo 

6.4

 Installing the bottle: immerse the suction hose,   

6.4

 push the bottle upwards, place it on the mounting  

6.4

 bracket 

6.a

 and press it against the rear panel. 

6.5

 Press the bow down approx. 70 mm with your  

6.5

 finger, hand or elbow and collect the filling material  

6.5

 with your other hand.

INFORMATION

NOTE: Stand, dispenser holder and dispenser are not 

NOTE:

 medically certified product. 

 

- Negative effects of the disinfectant on the products  

-

 (surfaces, material) are not known to us.  

- Nevertheless, we recommend to always remove  

-

 possible residues of the disinfectant in order to avoid  

-

 possible damage and to enjoy the product as long as  

-

 possible.  

- For cleaning purposes use a slightly damp cloth and  

-

 a non-abrasive cleaning agent.

6. Handling the disinfectant bottle

5. Attaching the 

5.

 dispenser

.

 

5.

 housing

3. Hole pattern for 

3.

 dispenser 

3.

 mounting

4. Mounting the rear panel of the dispenser

E. DIMENSIONS

D. DISPENSER

Base: 420 x 420 x 38 mm

Отзывы: