24185 Speaker wall mount
- adjustable to any angle by special swivel joint assembly
- During maintenance work, watch out for possible injuries
- Inspect bolted assemblies regularly
- For cleaning it is best to use a damp cloth an a mild,
-
nonabrasive detergent.
(F) FAULT FINDING and (R) REPAIR
F - Speaker sits loosely on speaker plate
R - Check and tighten screws
7
again
R
- Check speaker threads
F - Speaker doesn´t keep in position
R - Tighten grub srew
6
again
Place speaker on to the speaker plate and use four screws to screw it on
tightly. Attention: If necessary, two people should perform this task
F
H
CHECKING, MAINTENANCE, CLEANING
SPECIFICATIONS
Material
Tubes, Plates - steel, black powder coated
swivel joint - zinc die-cast,
black powder coated
screws - steel, zinc plated
Load
Speaker max. 8 kg
Dimensions
Speaker plate: 80 x 95 mm,
Wall plate: 95 x 95 mm,
Depth: 177 mm
Weight
0.7 kg
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24185-000-55 Rev.05 03-80-716-00 8/13
SPEAKER MOUNTING
DIMENSIONS & SETTINGS
Continuously adjustable in direction and angle.
Hold the speaker, loosen wing
5
& grub screw
4
,
turn speaker into desired position, tighten screws again.
G
SPEAKER ADJUSTING
