ATTACH WALL PLATE TO THE WALL
BRACKET MOUNTING
1. Find a location on the wall
1.
where you wish to mount the wall
1.
plate, ensuring that it is vertical.
2. Mark the drill holes.
3. Drill the holes for the
3.
wall plugs, 4x
3.
-ø 6 for anchor bolts
3.
-ø 8 for dowels
B
D
E
C
concrete wall
perforated bricks
wood wall
For easier mounting of the speaker adjust speaker plate
1
in
a way that the four holes are lateral from the swivel joint
3
Push swivel joint
3
over the tube
Tighten grub screw
4
with allen
wrench and wing screw
5
by hand
2. a. For installation into stone or masonary walls, use an appropriate wall anchor (not supplied).
2.
b. For installation on a wood or plaster wall, it is recommended that the wall adapter be attached
2. b.
to a supporting wall stud, or other suitable support. The two Center holes in the wall plate can
2. b.
be used for a stud wall installation.
24185 Speaker wall mount
- adjustable to any angle by special swivel joint assembly
SAFETY INSTRUCTIONS
MANUAL
Please check to ensure you have all of the following
components:
1
speaker plate with swivel joint
2
wallplate with tube
3
swivel joint
4
grub screw M6x8
5
wing screw M6x15
HOLE PATTERNS
A
- Max.load: 8 kg
- For indoor use only
- Choose a position and mounting method compliant with
-
local building codes and regulations
- Use four anchors per wall bracket
- For use only by trained installers
- Only for use at proper walls with adequate anchors
-
(see B; not included in delivery)
- Not suitable for fragile walls. Beware of power suplly lines
-
and water conduits. In case ask an expert.
- Inspect bolted assemblies regularly.
- Keep the grub screw
4
tightened; only loosen the
-
screws while adjusting the speaker
-
NOTE: before adjusting hold the speaker safe from tilting over;
-
in case, two people should perform this task
- Check speaker threads to ensure attachment screws
-
are not cross threaded
speaker plate
speaker
screw
not incl.
allen
wrench
AF3
not incl.
wall plate
