4. MOUNTING EXAMPLES
4.A Concrete wall:
Example: bolt anchor M8 x 75 mm
drill out, blow out hole, drive in anchor, mount
wall bracket, set washer, tighten nut with 20Nm.
4.B Perforated bricks:
Example: plastic frame anchor 10 x 100 mm with wood screw
DIN571 ø7 x 105 mm
drill out, blow out hole, set anchor, mount wall bracket, set washer,
turn in screws.
4.C Suitable for both concrete and perforated bricks: Grout injection anchorage
- WITHOUT sieve sleeve for solid bricks and concrete.
- WITH sieve sleeve for perforated bricks.
Advantage: Attachment is free of expanding pressure, which means the bracket can be exchanged as often as required and be attached close to
the edge (minimum distance 100 mm).
The detailed instructions for mounting are on the product information leaflet.
3.2
Drill the dowel holes 6 x
- ø 8 mm for bolt anchors
- ø10 mm for frame anchors
3.1
Position wall bracket
a
vertically and mark
the drill holes
3. WALL MOUNT
NOTE: the bracket can be mounted in two different ways :
a. completely pre-assembled or
b. at first only the loose wall bracket
a
on which the rest of the bracket is screwed afterwards (see chapter 2. ASSEMBLY)
