23900 Quick-Release adapter
23900
for microphones
Information for use
Intended use
The Quick-Release adapter enables the changing of microphones or other accessories with a
3/8" thread. This allows to change equipment quickly and easily on stages, studios or in rehear-
sal rooms. The adapter can be mounted on all stands with a 5/8" or 3/8" thread. The two threa-
ded bolts (supplied) allow an immediate change of accessories.
Foreseeable misapplication
Do not unscrew the Quick-Release adapter from the stand while a microphone or other accesso-
ries are attached.
General
u
Use a suitable stand. The stand should have sufficient stability and load-bearing capacity.
u
Please observe the usage instructions of the stand in use.
u
The user should be physically fit and technically competent.
u
The Quick-Release adapter should be firmly screwed onto the stand.
u
When changing equipment, make sure that the threaded bolt in the quick-release adapter is
u
engaged.
u
Do not remove the Quick-Release adapter when the microphone or accessories are attached.
u
The falling down of accessories may cause personal injury or damage to property.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
Technical data
Material
Threaded bolt: Steel, galvanised.
Housing upper part, thread reduction, locking: plastic, black, grey.
Housing lower part: Aluminium, anodised black.
Pressure spring: Steel, bright.
Load capacity
Microphones or other accessories with matching thread.
Dimensions
82 x ø 27 mm
Packing
98 x 48 x 31 mm
Weight
0.1 kg
