KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
19760-000-55 Rev.4 03-80-211-00 6/13
TECHNICAL DATA
Material
Swivel Bearing: Polyamid PA-6
Holding Plate: PP
Table legs: Steel, powder coating black
Screws, nuts, washers, springs: steel galvanized
Max. load
iPad mini
Dimensions
208.7 x 125 x 213 mm
Box 210 x 130 x 220 mm
Weight
net: 1.0 kg, gross: 1.3 kg
USAGE NOTES
SETUP
19760 iPad mini table stand
- Elegant Presentation! The best way to present your iPad
- Read, write, surf, look at pictures or watch videos - made easy
- The holder guarantees effective and secure setup:
-
Easy to clip the iPad onto the specially adapted holder
- The iPad can be positioned anywhere from 0 - 90°.
- With a flick of the wrist - the iPad mini can be presented in
-
the portrait or landscape position.
SAFETY NOTES
Thank you for choosing this product.
The instructions provide directions to all of the important set
up and handling steps. We recommend you keep these
instructions for future reference.
FAULT FINDING (F) & REPAIR (R)
F: Holder is unstable
F:
R: Check screws, if needed tighten screws
F: iPad mini is not firmly in place
F:
R: Place the iPad into the holder correctly
F: R:
(so you can hear the click)
ORIENTATION of the iPad mini
2
Place the iPad mini according to the HOME-Button Symbol
2
(consult the embossing on the holding plate).
PLACEMENT of the IPAD MINI
3
First PLACE the iPad mini into the bottom area and...
4
...then CLIP it into the top
REMOVAL of the IPAD MINI
5
Hold the iPad mini and lift up the hook
6
Hold the iPad mini and REMOVE it
The position and format of the iPad mini can be adjusted
To do this, the iPad mini does not have to be removed from
the holding plate to make the adjustments.
POSITION
The iPad mini can be placed in any vertical / horizontal position,
the final position can be set.
7
Hold the iPad mini and loosen the wing nut somewhat
8
Pick the position (vertical / horizontal) and...
9
...re-tighten the wing nut
FORMAT
The holder is equipped with a 90°-turning function.
This allows the presentation of the iPad mini in the portrait and
landscape positions.
10
Turn the holding plate either in the portrait or
10
landscape position - or it can be tilted!
10
- Hitches within the mount limit how far
10
-
the holder can be turned.
10
- In addition, the holding plate clicks
10
-
into both final positions.
1
The table stand is already completely assembled and can
1
be setup immediately without having to do anything else.
- only use on suitable surfaces:
-
level, load bearing and stable
- Carefully clip the iPad mini onto the mounting plate and
-
ensure that the iPad mini's fit is secure
- four rubber feet, that are as clear a glass, keep the stand
-
from slipping and protect the table from scratches
- handle the holder with care, in particular when
-
changing the position and format.
- specially adjusted to the iPad mini
POSITION
PLACEMENT of the
iPad mini
REMOVAL of the
iPad mini
FORMAT
ORIENTATION of the iPad mini
Volume Control
Camera (Back)
Camera (Front)
Speakers
Lightning
connector
Microphone
On / Off
Switch
Microphone
3.5 mm-
Connector
bottom
PLACE
Final Position
- horizontal
- as far as it goes
Incline Position:
- tilted (0-90°)
- select any position (Secure position
-
by tightening the wing nut
Final Position
- vertical
- as far as it goes
Final Position
- landscape
- click into place
Incline Position:
- tilted
- cannot be clicked into place, however
-
it does stay in the selected position
Final Position
- portrait
- click into place
Lift up
the hook
Remove
top
CLIP ON
Home-Button
(the holder is embossed with information on where the iPad mini is to be placed)
(false placement results in the embossed user elements being covered up! Please note)
