Mounting
To mount the smartphone holder, proceed as follows:
1.) Unpack and check product for damage and completeness
Technical data
Material
Threaded bolt: Steel, powder-coated black
Smartphone holder, support, swivel joint and
cap nut : PC-ABS
Support arm inside: Aluminum rod
Support arm outside, knurled handle: PA
Load capacity
Smartphones and similar devices
Adjustment range
Smartphone holder: 58-84 mm
Vertical and horizontal: 180° and 360°
Packaging
124 x 97 x 76 mm
Weight
0.2 kg
Smartphone holder with two pair of support brackets
Locking plate with swivel joint
Gooseneck
2.) Connecting the smartphone holder with the locking plate
Insert the four hooks of the locking plate into the
smartphone holder and push the locking plate in
the direction of the arrow CLOSE. The smartphone
holder audibly clicks into place on the locking plate. If
required, the mount of the smartphone holder can be
rotated by 180°. This may be necessary if operating
elements on the smartphone are covered by the
holder. In this case, the support brackets must be
mounted in the opposite groove.
Thread adapter (only for 19748-500-55)
