Fault and troubleshooting
Storage, disposal
Store the speaker tilt connector in a dry place.
Recycle disassembled components:
u
Scrape all components made of metal.
u
Recycle or reuse all plastic, paper, and cardboard components.
u
Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: 09342/8060
Fax: 09342/806-150
E-Mail: [email protected]
Web: www.k-m.de
19671-000-55 Rev.04 03-80-077-00 2/21
Fault/cause
Check/Remedy
Speaker tilt connector cannot
be inserted on stand
● Check the stand tube, it must have a diameter of 35 mm.
● Loosen the clamping screw on the speaker tilt connector,
●
it should not protrude into the inside of the support tube.
Speaker tilt connector does not
fit into loudspeaker holder
● The loudspeaker mount must have a diameter of at least
●
35 mm.
Loudspeaker wobbles on the
speaker tilt connector
● The loudspeaker mount must not be larger than 36 mm
●
in diameter.
● Check screw connections for tightness.
Unsafe standing of the stand
● Bringing the loudspeaker center of gravity to the center of
●
the stand.
● Align the loudspeaker over one leg of the stand.
