TECHNICAL DATA
USAGE NOTES / FUNCTION
FAULT-FINDING (F)
and REPAIR (R)
6. COMPONENTS
6.A
- 18805 Sheet music and concept holder
6.B
- 211 ff Boom arms
6.C
- 19712 ff Tablet PC stand holder
6.D
- Various products with threaded connector
7./8./9./10. ADJUSTMENTS
18817 Universal Holder
i.e. its components (18805, 211... etc.)
can be adjusted in height, direction, angle
and distance.
In addition, the keyboard stands
can be adjusted to different positions.
WE RECOMMEND:
Prior to adjusting the holder and transport:
the stand should only be transported
after any equipment has been removed.
7. HEIGHT
7.1
Unscrew clamp screw
7.1
completely and...
7.2
...Place the stand tube in one of the
7.2
possible 8 positions;
7.2
Screw the clamp screw back in
8. DIRECTION
8.1
Loosen the knurled washer and...
8.2
...place the component in the
8.2
desired direction;
8.3
Re-tighten the knurled washer
9. ANGLE
9.1
Loosen the locking nut on the side and...
9.2
...Anbauteil (Platte, Arm, PC-Halter)
9.2
at the desired angle.
9.2
Re-tighten the wing-nut
9.1
.
10. DISTANCE
10.1
Loosen the knurled screw and...
10.2
...Pull the insertion tube towards the back.
10.2
NOTE: the noted maximum
10.2
distances provide for a minimum
10.2
coverage of the tubes of 100 mm.
WARNING:
Increasing the distance can result in
an unfavorable weight distribution. Ensure that
the stability of the stand is guaranteed, in any
case.
F: Installation is not stable
F:
R: Check to see if the parts are in the right
F: R:
positions and the screws are properly
F: R:
tightened.
F:
R: Ensure that the insertion tube is inserted
F: R:
deep enough: min 100 mm.
F:
R: Check to see that the keyboard stand
F: R:
is properly setup.
Material
Tubes, joint bracket: Steel,
powder-coated, black
Screws, disks: Steel, galvanized
Plastic parts: PA, PE, black
Dimensions
Stand tube: ø 25 x 450 mm
Height adjustment 294 mm
(7 x 42 mm)
Horizontal supports:
25 x 15 x 195 mm
Depth adjustment: 80 - 95 mm
Weight
0.65 kg
8. DIRECTION
Bsp. 18805 Sheet music and concept
holder
6.B - 211 ff Boom arms
6.C - 19712/13/14/17/18
6.C -
42/90/95 Tablet holder
6.D - various
85035 ff 223 ff
7-232-
000155
Bsp.
18950
18953
Table-style
keyboard
stand
Bsp.
18805 Sheet
music and
concept holder
6. COMPONENTS
6.A -18805 Sheet music and
6.A -
concept holder
9. ANGLE
Bsp. 197.. Tablet holder
7. HEIGHT
10. DISTANCE - 18810 »Omega« and 18814 Adapter
10. DISTANCE - 18950/53 Table-style keyboard stand
10. DISTANCE - 18950/53 Table-style keyboard stand and 18954 Adapter
