KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18817-000-55 Rev.08 03-79-262-00 8/18
SETUP INSTRUCTIONS
18817 Universal holder
- to extend »Omega« (18810) and Table-style keyboard stand (18950/53) with:
a. Tablet PC stand holder (19712/13/14/15/17/18/42/90/95)
b. Sheet music and concept holder (18805)
c. Boom arm (211, 21110, 21140 ff)
- height adjustable (0, 42, 84 ... 294 mm) and depth adjustable (up to approx. 90 mm)
- direct mount or via Adapter (No. 18814 > 18810 and No. 18954 > 18950/53)
SAFETY NOTES
1. COMPONENTS
1.1
Stand tube with threaded bolt 3/8" -
1.2
Horizontal support (half shell of the insertion pipe)
Accessory bag:
1.3
Knurled screw M6 x 12 mm -
1.4
Clamp screw M8 x 33 mm -
1.5
Thread adapter 3/8"-5/8" -
1.6
Knurled washer ø28 x 3/8"
- Please consider the information provided in the setup instructions
- Please also consider the safety and the assembly instructions for the keyboard stand and
-
possible adapters: a. 18810 »Omega« in combination with 18814 adapter,
-
b. 18950/53 Table-style keyboard stand direct or c. with 18954 Adapter
- Ensure that the screws are tight on all of the involved products
- Protect against moisture
- In the event of workstation maintenance pay attention to possible risks
- Damaged parts must be replaced (e.g. wedging, bumping into stand)
- To care for the product, use a damp cloth and a non-abrasive cleaning agent.
2./3./4. INSTALLATION of
2./3./4.
18817 Universal holder
2./3./4.
to the KEYBOARD STAND
There are three options :
2
18810 »OMEGA« - with 18814 ADAPTER
2
2.1
Install 18814 Adapter (see Instruction 18814)
2
2.2
Place the insertion pipe
1.2
into
2 2.2
the adapter as far as it will go
2
2.3
Secure the position by
2 2.3
tightening the knurled screw
1.3
3
18950/18953 TABLE-STYLE KEYBOARD STAND - DIRECT
3
3.1
Remove the cap from the tube on
3 3.1
the Table-style keyboard stand
3
3.2
Place the insertion pipe
1.2
into
3 3.2
the stand tube as far as it will go
3
3.3
Secure the position by
3 3.3
tightening the knurled screw
1.3
4
18950/18953 TABLE-STYLE
4
KEYBOARD STAND - with 18954 ADAPTER
4
4.1
Install 18954 Adapter
4 4.1
(see Instruction 18954)
4
4.2
Place the insertion pipe
1.2
into
4 4.2
the adapter tube as far as it will go
4
4.3
Secure the position by
4 4.3
tightening the knurled screw
1.3
5. ASSEMBLY of the Stand tube
for example:
3. 18950/18953 TABLE-STYLE KEYBOARD STAND - DIRECT
5.1
Have the clamp screw
1.4
ready
5.2
Hold the standing tube
1.1
at the
5.2
desired height (8 steps) to the half shell
5.2
of the insertion tube
1.2
and...
5.3
...secure this position by
5.3
tightening the clamp screw
1.4
.
Thank you for choosing this product. The instructions provide directions to all of the important
set up and handling steps. We recommend you keep these instructions for future reference.