KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
17720-000-55 Rev.01 03-80-882-00 10/14
TECHNICAL DATA
SETUP INSTRUCTIONS
17720 Floor Stand
for SPOTLIGHTS with
Mini TV Peg Holder
Sturdy - compact - quick
The stand sports so-called
CROSS LEGS and offers a series of advantages
- 4 point support with rubber feet
- robust and durable metal construction
- folds flat for space-saving storage
- extremely simple handling; tools not required
- with integrated Mini-TV- Peg Holder
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions
to all of the important set up and handling steps. We recommend you
keep these instructions for future reference.
CHECK, MAINTENANCE, CLEANING
- in the event of workstation maintenance pay attention to possible risks
-
(wedging, bumping into the stand)
- to care for the product use a damp cloth
FAULT-FINDING (F) and REPAIR (R)
F: Stand is not stable R: Check the surface
R: Replace the rubber feet
R: Check to ensure the struts are straight
F: Spotlight is not stable R: Tighten the screws on the stand and
R:
spotlight
Setting up the 17720 Floor Stand is very easy. All parts come
pre-assembled. All that needs to be done is to place the stand in
position.
1
Loosen the lower wing nut and...
2
...turn the leg struts until they form a 90° angle.
2
(= best sturdiness); now re-tighten wing nut
1
.
3
Unscrew the side clamp screw until the bracket
3
for the Mini-TV Peg of the Spotlight is free.
4
Place the Mini-TV-Peg of the Spotlight into the bracket.
5
Position the spotlight in the desired position...
6
...and tighten the side clamp screw.
Disassembly of the stand: after removing the spotlight
7
Put the struts over each other.
The floor stand is compact and easy to transport.
- Be sure that the surface will bear the load and is suitable and level.
- Place the two struts of the cross legs at a 90° angle to each other;
-
any other positioning of the struts will result in instability.
- Ensure the screws are properly tightened.
- The fact that the product is collapsible and adjustable, can result in the
-
risk of pinching/wedging. Careful and attentive handling during setup,
-
operation, and disassembly is indispensable.
Material
Struts, bracket: Steel, powder coating, black
Washer, screw: Steel, galvanized
Handle: PA-6, black
End caps, disk: TPE, black
max. Weight
Spotlight with Mini-TV-Pin connector
Dimensions
Setup dimensions: ø 352 x 68 mm
Package Dimensions: 352 x 26 x 68 mm
Weight
0.7 kg
Packaging
Polybag 125 x 450 mm
SETUP
SPOTLIGHT
SPACE REQUIREMENT
DISASSEMBLY
&
PRODUCT
