The compact stand construction places the
instrument in the spotlight and is the perfect
medium to present the violin.
- The body rests on rubberized support arms
- Simple setup, without the use of tools
- Very compact and collapsible,
-
ideal for storage and transport
- Solid and stable footing thanks to the four point
-
support system and the three cross-struts
- W x D x H: 96 x 147 x 205 mm, Weight 0.15 kg
Thank you for choosing this product. The
instructions provide directions to all of the
important set up and handling steps.
We recommend you keep these instructions for
future reference.
- for small string instruments, such as violins and
-
ukuleles
- Carefully place the instrument on the stand
- Ensure that the instrument is centered on the stand
- The floor must be load bearing and even.
- When in use ensure that the three cross-struts
-
and the side support arms are always firmly
-
clicked into place.
SAFETY NOTES
The stand consists of 5 components:
- two side pieces and
- three cross-struts,
which are simple to put together
- tools are not required.
And this is how it’s done:
1. Stick the cross-strut into
1.
a side piece ....
2. ... as far as it will go.
3. Move the cross-strut until you
3.
hear it click.
4. Install all three cross-struts into
4.
the same side piece until they click into place.
5. Also install all three cross-struts into
5.
the second side piece as described
5.
above under Sections 1 - 3.
Place the stand on a suitable surface
(please refer to the Safety Notes)
and carefully place the instrument on the stand.
Disassembly is performed in the
reverse order.
SETUP INSTRUCTIONS
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
15550-000-98 Rev.01 1/18
15550 Violin/Ukulele Display Stand
PRACTICAL, QUICK & UNDERSTATED
two side pieces
three cross-struts
