Tuba Stands 14940
Set-up
Swing out the feet
1
as shown in the picture. Raise fold-up supports
3
and
fasten them tight with the knurled nut/locking screw
2
at the lower ends.
Setting the width
Loosen screws
4
and slide the stands outwards or inwards to the desired
width, then retighten the screws
4
.
Instrument widths min./max.: 275/460 mm.
Setting the height
Remove caps
5
. Loosen hexagonal nuts
7
using ring wrench
6
, reposition
each of the upper rails
3a
and retighten the hexagonal nuts
7
. Replace caps
5
.
For extreme height adjustment
Remove caps
5
and completely detach the connecting screws. Position each
of the rails
3a
by inserting the screws
9
into the appropriate square holes,
replace washers
8
and refasten with the hexagonal nuts
7
. Replace caps
5
.
Height min./max.:300/405 mm.
-14940.000.55
-03.80.540.00- 12/00
Made in Germany
1
2
3
5
6 7 8
9
4
3a
Please note: Above numbers are not
our ordinary spare part numbers!
