USAGE NOTES / FUNCTION
HEIGHT ADJUSTMENT
ANGLE OF THE SEAT
CHECK, MAINTENANCE, CLEANING
- In the event of workstation maintenance pay attention to possible risks
- To care for the product use a damp cloth and a non-abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: The stool is not stable:
F:
R: Check surface and adjust accordingly, if needed adjust the end caps.
F:
R: Extend the foot tube all the way.
F:
R: Screws, catch/clamp handle, tighten clamping mechanism.
F: Foot support slips:
F:
R: Place Knobs (8) of the U latch in the base tube and tighten the screws.
1.
Loosen the Catch/
Clamp handle
5
a bit
2.
Pull the handle until
the locking bolt
is no longer in
the drill hole
3.
Extension tube -
extend or collapse
4.
Place the locking bolt
in the desired drill hole
and tighten the
catch/clamp
handle
5
- loosen the screws
9
so that the knobs come out of the drill holes,
-
then lift the U latch
7
somewhat and place in one of the desired 9
-
positions.
- then re-tighten the screw
9
The angle of the seat can be adjusted variably from 0° to 75°.
This means: - every practical seat position can be selected
This means:
- the seat cannot tilt backwards
This means:
- the stool can be collapsed into a very small and easy to transport package - and is well
This means: -
suited for transportation
This means:
- just loosen the clamping mechanism
3
, place the seat at the desired angle and re-tighten
DIMENSIONS (in mm)
ADJUST FOOT SUPPORT
USAGE NOTES / FUNCTION
If necessary, the stool can be equipped
with a backrest.
(Art.-Nr. 14042-000-55 imitation leather,
14043-000-55 fabric)
