SAFETY NOTES
SETUP
STOOL
- Extend both foot tubes all the way
1
and place on the
-
floor.
- Adjust the end caps
2
to ensure that the stool is even -
-
if the surface is uneven.
- Loosen the locking handle
3
, adjust the seat height to
-
the desired position
4
, re-tighten the locking handle.
- Screw in the catch clamp screws
5
in the threading hole
-
of the base tube and have the bolt catch in one of the
-
drill holes of the extension tube.
-
(see Section: HEIGHT ADJUSTMENT)
FOOT SUPPORT
It provides the stool with a relaxing effect and is attached
to the base tube.
(9 positions are available):
- To adjust place the U latch
7
of the foot support over the
-
base tube and be sure that BOTH knobs
8
are placed in
-
the corresponding drill holes
- now screw
9
the horizontal tube of the foot support to
-
both sides of the base tube with the opposite clamp
-
latch
6
TECHNICAL DATA
Thank you for choosing this product. This instruction manual informs you about the important steps
to set up and handle the product. We recommend to keep the manual in a separate place for a
possible later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14044-000-55 Rev.07 / 14045-000-55 Rev.15 03-80-719-00 7/13
- The height of the stool is adjusted with a catch/clamp handle
5
,
-
please ensure that the pin attached to the handle always catches
-
when placed in a drill hole of the extension tube.
- When adjusting the height please do not place any weight on the seat.
- The angle of the seat is adjusted with a locking handle
3
.
-
Please tighten appropriately - manual strength is enough.
- Both foot tubes are extended all the way.
- Be careful when setting up, due to the fact that the adjustment options
-
can result in pinching or wedging.
14044/14045 Stool
- specifically crafted for - but not limited to - Instrumentalists
- protects against fatigue and supports your back
- comfortable, ergonomically formed seat with imitation leather or
-
wear-resistant fabric
- adjustable seat - both height and tilt 600-900 mm
- with a footrest that can also be adjusted
- robust, stable and secure stool
- with balancing end caps for uneven surfaces
- easy to transport, folds together - is space saving
- weight 5.8 kg
Material
Tubes, sheet metal parts, screws: steel
Handles, guides: polyamide (PA)
End caps: TPE
Seat: fabric (14044), imitation leather (14045)
Dimensions
Seat height: 600-900 mm
Setup Dimensions: W x D 400 x 450 mm
Weight
5.6 kg
Box
W x D x H: 880 x 410 x 210 mm
Accessories
optional: backrest 14042 or 14043
