Material
Base tube: steel, chrome
Tubes: Steel, powder coating, black
Seat mechanic, pneumatic spring Steel, diverse
Connection elements: Steel, galvanized
Caps, grips, guides: PA, PE
Cushion covering: Trevira CS (flame retardant)
Load-bearing
1 Person, 100 kg (static load)
Dimensions
Root circle diameter 630 mm
Seat surface: 450 x 440 mm
Seat height: 450-575 mm
Cardboard
B x T x H: 600 x 600 x 640 mm
Weight
net : 11 kg; gross: 13 kg
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
13470-019-55 Rev.01 03-80-437-00 11/21
TECHNICAL DATA
3.1 SEAT: Height
3.2 SEAT: Inclination
4.1 BACKREST: Height
4.2 BACKREST: Cushion
CHECK, MAINTENANCE, CLEANING
- Watch out for hazards during maintenance work (jamming...)
- For cleaning, use a slightly damp cloth and a non-abrasive
-
cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Chair for percussion wobbles
F:
R: Check the surface for suitability
F:
R: Foot stand and base plate complete and in good order?
F: Seat, backrest too high/low/etc.
F:
R: Change settings
F: Chair cannot be adjusted as desired
F:
R: See operating instructions:
F:
R:
Follow procedure/limitations of settings
USAGE NOTES and FUNCTIONS
3. SETTING the SEAT
3.1 SEAT HEIGHT
(stepless from 450 - 575 mm):
3.1.1
Raise the right front lever
R1
3.1.2
RETRACTING the seat: LOADING the seating surface
3.1.3
EXTENDING the seat: UNLOADING the seating surface
NOTE: As soon as the lever
3.1.1
is no longer actuated,
NOTE:
the seat remains in the set position.
3.2 SEAT INCLINATION
(stepless from -4° to + 4°):
3.2.1
Lift the lever on the left
L
firmly and hold it in place,
3.2.1
by SHIFTING THE BODY WEIGHT set the incline of
3.2.1
the seat as desired:
3.2.2
- backwards (~4°/-) or
3.2.3
- forwards (~4°/+).
NOTE : As soon as the lever
3.2.1
is no longer actuated,
NOTE :
the seat remains in the selected incline.
4. ADJUST the BACKREST
4.1 BACKREST HEIGHT
4.1.1
Hold the backrest and loosen the clamping screw.
4.1.2
Then push the retaining tube to the desired height
4.1.2
and secure the position of the backrest by tightening
4.1.2
the clamping screw.
4.1.3
The maximum height of the backrest is limited by a
4.1.3
stop bolt. See chapter
2. ASSEMBLY
, Position
2.6
4.2 BACKREST CUSHION
4.2.1
The backrest-cushion is firmly connected to the retaining
4.2.1
tube, but can nevertheless be rotated by approx. 30°.
4.2.2
There is no need for any pre-adjustment, since the
4.2.2
upholstery automatically adapts to the user's back.
4.3 BACKREST INCLINATION
4.3.1
Push down the right rear lever
R2
…
4.3.2
…and the backrest swings forwards.
4.3.3
Select the desired position through back pressure…
4.3.4
…and secure it by lifting lever
R2
.
4.3 BACKREST: Inclination
Top view
Top view
Top view
