13470 Chair for Percussion
INTENDED USE
- Musician’s chair with individual adjustment options for professional use
- Particularly designed for percussion, cello, harp and other "moving"
-
instruments
FEATURES & CAPABILITIES
- Seat and backrest are upholstered with a fire retardant
-
fabric (Trevira, CS)
- Seat and backrest are infinitely adjustable in height
-
(by gas pressure spring) and incline.
- Seat twistable, which gives the performer freedom of movement
- 5 leg base:
-
- elegant shape, - sturdy design,
-
- secure stand thanks to anti-slip and low-noise rubber pads
-
for the five-legged stool chair
- Footrest in the shape of a one third circle:
-
- infinitely adjustable in height and alignment
- Classic finish: covered by a black powder coating.
- Dimensions: seat 450 x 440 mm, height 450-575 mm, weight 11 kg
SAFETY INSTRUCTIONS
Thank you for choosing this product.
Please read these instructions carefully before mounting and using
the item.They will inform you about all steps required and ensure
safe handling. We advise to keep the instructions for future reference.
- Before and after using the chair, please visually inspect for
-
completeness, function and possible damage.
- A damaged chair may not be used until technically inspected
-
and repaired.
- Only use on suitable flooring, i.e., ensure that flooring is even
-
and has sufficient bearing capacity.
- Careful and diligent treatment will maintain the chair's functional
-
longevity and last but not least warrants the safety of chair and
-
user.
- The appropriate employing of the body weight ensures the
-
smooth retraction or extension of the gas pressure spring.
- PLEASE NOTE: The chair for percussion is a seating
-
appliance –for safety reasons it is not allowed to use the chair as
-
climbing aid or similar.
INSTALLATION INSTRUCTIONS
1. COMPONENTS
The package contains the pre-assembled
A
CHAIR FOR PERCUSSION, as well as the
B
BACKREST
First visually check that the items are complete and in order.
For e.g.:
A.1
Seat cushion: condition, close fit…
A.2
Seat mechanism: condition, screws complete…
A.3
Plastic cylinder: telescopic rods completely covered…
A.4
5-leg base: wobble-free, powder coating…
A.5
Base plates: completeness (bolts, stands, paddings),
Quantity 5, fitting in base frame…
A.6
Control levers
L
,
R1
,
R2
: condition, function…
A.6
(
L
=seat incline,
R1
=seat height,
R2
=backrest incline)
B.1
Upholstery backrest: damage-free, tight fit…
B.2
Screw connection: completeness, tight fit…
B.3
Retaining tube: condition, powder coating…
B.4
Extension lock: fitting, movement…
2. ASSEMBLY of the BACKREST
2.1
Slightly loosen the clamping screw of the backrest support
2.2
Set the retaining tube to the backrest support…
2.3
…simultaneously press the button of the extension lock…
2.4
…and push the retaining tube through the opening of the
2.4
holding fixture until the button locks it again.
2.5
Finally retighten the clamping screw
DISASSEMBLY
2.6
A stop bolt under spring pressure prevents the removal of
2.6
the retaining tube from the holding fixture.
2.7
Only by deliberately pressing the stop bolt the retaining tube
2.7
can be pulled out completely.
2.7
This may come in useful for transport purposes.
1. COMPONENTS
2. ASSEMBLY of the BACKREST
Top view
DISASSEMBLY
