KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
12384-000-55 Rev.4 03-80-689-00 3/15
TECHNICAL DATA
Material
Panel: Aluminum, black, powder coated
Clamps: Steel, black powder coating
Handles, pressure fittings: PA, black
Threads: Steel, galvanized
Dimensions
Panel: W x H x D: 520 x 800 x 1,5 mm
Clamps: 27 x 48 x 47 mm
max. thickness of the music desk: 13 mm
Packaging
Carton, corrugated paper
Weight
1,9 kg
MOUNTING INSTRUCTIONS
CHECK, MAINTENANCE, CLEANING
12384 Advertising panel
for orchestra music desks
SHOW WHO YOUR ARE!
- On a 80 x 52 cm panel you have plenty of room for your message
- Light and safe installation of the support arms
- Quick attachment and removal of the panel
- No tools required
- Very versatile, it is not stand dependent
- Made of light but very sturdy aluminum
SAFETY NOTES
Thank you for choosing this product. The instructions provide directions to all of
the important set up and handling steps. We recommend you keep these
instructions for future reference.
First properly setup the stand. Then:
1
Adjust the desired angle of the music desk and
1
set the desired position by tightening the clamp screws.
2
Place the clamps on the music desk and preset the clamp
2
screw so there is enough room to easily hang the clamps.
3
Hook in both clamps into the slits on the advertising panel.
4
Hang the clamps and the advertising panel onto the
4
music desk.
5
Center the clamps on the music desk.
6
Tighten the screws of both stop clamps.
Disassembly is performed in reverse order.
USAGE NOTES
LETTERING/MESSAGE
The advertising panel (made of aluminum) is covered
with plastic, so-called powder coating.
This is an excellent background for individual
messages - be it you wish to use foil, print
or write the message by hand.
ANGLE ADJUSTMENT
When adjusting the angle of the music desk
1
the advertising panel should be removed first.
If that is not desired, the advertising panel must
be held to loosen the clamp screw
1
to avoid having the music stand fall over
due to the weight of the advertising panel.
- Be sure that the stand surface is suitable and level
- Suitable orchestra stands like e.g.
-
KÖNIG &MEYER 118/1, 11888, 11899, 11950
- The angle of the desk of the music desk must be attached
-
by tightening the clamp screws
1
- Properly attach both clamps to the music desk.
- In the event of workstation maintenance pay attention to
-
possible risks (pinch / wedge a finger, the stand falls
-
over, someone bumps into the stand...)
- To care for the product use a damp cloth and a non-
-
abrasive cleaning agent.
IN ACTION
ASSEMBLY
DIMENSIONS
Clamps (2x)
Example
Orchestra
Music Stand
K&M 11811
Height:
min – max
Advertising
-
panel
