Konica Minolta ViZion DR+ 1417V2, Руководство по калибровке, Страница: 9 / 19

[ViZion DR+ 1417V2 Wireless Panel Calibration Manual]
[Ultra 4.2.9.0]
9
Customer Support 1.800.366.5343
–
HCITsupport@konicaminolta.com
1.7 Mobile Network Configuration
For mobile environments, the panel can be put
into
Client mode (to connect the laptop to an
external access point device, that the panel will
connect to [recommended method]), or put in
AP mode (to allow the panel to broadcast a
wireless network, for the laptop to connect to
[alternative method).
1.7.1 ViZion DR+ 1417V2 Wireless Panel in
Client Mode (Recommended method)
When the panel is in Client mode , the panel
will connect automatically to the external TP-
Link Access Point
, using the laptop’s LAN
Ethernet adapter. For your internet connection,
you will connect to any available Wi-Fi network
using the
laptop’s internal wireless adapter.
Equipment required for Client mode:
•
TP-Link AC750 Wireless Travel Router
Access Point
•
Link Cable (to preconfigure the panel
’s
wireless settings)
To connect the preconfigured TP-Link AP to the
laptop:
1. Unpack the TP-Link AC750 AP (model
TL-WR902AC).
2. Make sure the mode switch on the
side of the access point is set to
AP/Rng Ext/Client .
3. Connect the supplied USB cable
from the laptop to the access point
(supplies power to the device when
plugged in).
4. Connect the supplied Cat5 Ethernet
cable from the laptop network
adapter to the access point.
1.7.2 ViZion DR+ 1417V2 Wireless Panel in
AP Mode (Alternative method)
When the panel is in AP mode you will connect
to the panel’s broadcasted Wi-Fi network,
(which will be named the same as the serial
number of the panel)
, using the laptop’s internal
wireless adapter. For your internet connection,
you will connect to any available Wi-Fi network
using the external USB Wi-Fi adapter.
Equipment required for AP mode:
•
ASUS Dual-Band Wi-Fi USB Adapter
(used for the Wi-Fi Internet connection)
•
Link Cable (to preconfigure the panel’s
wireless settings)