background image

Repacking the Printer

5

4

Replace the original screen covers on the top of the printer.

5

Repack the 5-bin mailbox in its original shipping carton for storage or shipment.

5

"

If you’re returning the printer for service, you don’t need to return the 5-bin mailbox, 
unless the problem is with the 5-bin mailbox.

Remove the Lower Feeder Unit

5

"

If you don’t have a lower feeder unit installed, skip to the next section.

1

Remove the rear bracket securing the lower feeder unit to the printer.

2

Remove the upper media tray.

3

Remove the brackets on the right and left in front that are securing the optional tray to 
the printer.

4

Replace the upper media tray.

5

With the help of another person, lift the printer by its carrying grips and carrying bar, 
and place the printer on a table.

WARNING!

The printer weighs approximately 87.1 lbs (39.5 kgs) without consumables. Be sure to have 
help when lifting and moving it.

6

Repack the lower feeder unit in its original shipping carton 
for storage or shipment. 

5

"

If you’re returning the printer for service, you don’t need to 
return the lower feeder unit, unless the problem is with the 
lower feeder unit.

Содержание magicolor 2200 DeskLaser









Отзывы: