background image

79

Appendix

8

FCC Statement:

Declaration of Conformity
Responsible party: KONICA PHOTO IMAGING
Address: 725 Darlington Avenue Mahwah, NJ 07430, U.S.A.
Telephone number: (201) 574-4000

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference in a residential installation.  This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.  However, there is no guarantee that interference will not occur in a
particular installation.  If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

•Shielded cables must be used for this equipment to comply with the relevant FCC

regulation.

•Power requirement is DC 5V ± 10% and 2 A max.  Use only listed certified power

supply adapter.

•The user is cautioned that changes and modifications made to the equipment without

approval of the manufacturer could void the user’s authority to operate this equipment.

Tested To Comply
With FCC Standards

FOR HOME OR OFFICE USE

ENGLISH

However, note that operation of this unit near a radio or television receiver
could possibly cause radio disturbance.

CANADA ONLY

Industry Canada’s Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

Содержание Konica Digital Revio KD-200Z

















































































Отзывы: