Konica Minolta IP-422, Руководство по обслуживанию

Страница: 59 / 92

Chapter 3 Field Service
3-17
Disable L2 Cache. (Disable the use of L1 cache)
Disable L1 Cache.
(Disable the use of L2 cache)
00000640K Low Memory Passed
(Test memory between 64KB and 640KB)
00064512K Ext Memory Passed (Test memory above 640KB)
Check Key In. (Check keyboard input)
PCI Device Table.
(List of PCI devices)
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7190 Host Bridge
00 01 00 8086 7191 PCI-to-PCI Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 10
00 07 03 8086 7113 PCI Bridge
00 11 00 4B43 505E Konica PCI Device 11
00 12 00 4B43 5859 Konica PCI Device 3
00 12 01 4B43 5859 Konica PCI Device 3
00 12 02 4B43 5859 Konica PCI Device 3
00 12 03 4B43 5859 Konica PCI Device 3
00 12 04 4B43 5859 Konica PCI Device 3
00 12 05 4B43 5859 Konica PCI Device 3
00 12 06 4B43 5859 Konica PCI Device 3
00 12 07 4B43 5859 Konica PCI Device 3
00 13 00 4B43 5050 Konica PCI Device 5
Test Hard Disk Drive. (Search for and initialize hard disk drive)
Init Coprocessor.
(Initialize Coprocessor)
Enable Cache Memory.
(Enable the use of cache memory)
Enable Coprocessor INT & NMI. (Enable .NMI. Initialize Coprocessor)
Enable Clock Ctrl. (Set the clock control)
Boot!
(Load and start OS)
Error List
When an error that relates to the system boot occurs while running POST, "Critical Error" is output and dis-
played via the service port, and the system boot is interrupted.
The following can cause a critical error:
•
The memory area under 640 KB cannot be accessed
•
There is a faulty memory refresh
•
There is an error reading/writing CMOS memory
•
The CPU timer does not operate correctly
•
The interrupt controller does not operate correctly
If the POST is interrupted due to an error other than those above, there may a system fault. In this case,
check the "Details of the Service Port Output" and look for an error.
If this kind of error occurs, the system cannot boot and the copier and print controller will not be able to com-
municate, and communication errors will occur with the controller after the copier has started.