E-2
*
This part is not used in this installation.
Note:
• This manual provides the illustrations of the
accessory parts and machine that may be
slightly different in shape from yours. In that
case, instead of the illustrations, use the
appearance of your machine to follow the
installation procedure. This does not cause any
significant change or problem with the proce-
dure.
• If none of the later steps instruct you to use the
parts including screw and cover that you
removed following the instructions described in
this manual, discard them.
• Before installing the video interface kit and
image controller to the machine, the paper feed
cabinet PC-110, PC-210, PC-410, or the desk
DK-510 needs to be installed in advance.
II. Part names
<Softswitch>
• Lights up when the image controller is running or
is ready to be used.
• When turned on, the image controller system
starts up.
• When turned off, the image controller system
safely shuts down.
Note:
• If the image controller malfunctions or cannot
be shut off with the softswitch, be sure to
unplug the power cord from the electrical outlet
or the machine’s power cord connector.
• Remove the seal from the connector of the
power cord.
11. Installation
manual
1 set
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
No.
Name
Shape
Q’ty
4980IXC019DA
Ethernet 10Base-T/100Base-TX/1000Base-T
network port (Port 1)
Copier LAN cable port (Port 2)
Softswitch LED
Image transmission
connector
Power
cord
connector
A4MGIXC007DB