E-15
[If the staple positions deviate as shown below]
Using the
key, set the numeric value.
[If the staple positions deviate as shown below]
Using the
key, set the numeric value.
(8) Touch “Test Copy.”
(9) Select the tray loading paper for the test copy.
(10) Touch “3.”
(11) Touch “Fold & Staple”, and press the start key.
(12) Check the staple positions deviate.
(13) Touch “END” to return to the adjustment
screen.
(14) Touch “OK” twice.
(15) Touch “Exit” on the Service Mode screen.
<Tri-fold position adjustment>
First fold position adjustment
(1) Check the width of the first fold position “a.”
Reference: Unit: mm
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the Service Manual.)
(3) Touch “Finisher.”
(4) Touch “FS-FN adjustment.”
(5) Touch “1st Tri-Fold Adjustment.”
(6) Check that “ALL” is displayed in reversed.
(7) Enter a value with
or
key.
•
To make width a greater: Enter the value of
.
•
To make width a smaller: Enter the value of
.
(8) Touch “Test Copy.”
(9) Select the tray loading paper for the test copy.
(10) Touch “3.”
(11) Touch “Tri-Fold”, and press the start key.
(12) Check the first fold positions deviate.
(13) Touch “END” to return to the adjustment
screen.
(14) Touch “OK” twice.
(15) Touch “Exit” on the Service Mode screen.
A
A
Section Item
Normal value
Standard
A4R 8.5x11R 16KR
Fold
position
a
95
89.4
88
±2
b
102
96
92
±2
c
Not specified
b
c
First fold
Second fold
a
