E-6
6. Reattach the upper left cover removed in step 4
to the main unit. (Three screws)
7. Close the front door of the main unit.
8. Remove the guide from the main unit.
9. Remove the cover shown in the illustration from
the main unit. (Two screws)
10. Remove the harness shown in the illustration
from the wire saddles of the main unit.
11. Peel the seal off the cover removed in step 9 as
shown in the illustration.
12. Attach the supplied sensor unit to the main unit
by fitting the two tabs into the slots.
13. Secure the sensor unit with the supplied screw
B.
A2YVIXC005DA
A2YVIXC006DA
A3EPIXC058DA
Harness
A3EPIXC059DA
A2YVIXC011DA
A2YVIXC012DA
