DK-701/DK-702/DK-703
– 2 –
■
Adjusting the Adjusters
■
Attaching the Desk
1. Place the machine/paper feed unit on top of the desk, ensuring that the two are
aligned properly with each other.
2. Fix the machine on the Desk or the paper feeder unit on the Desk.
（
Six screws in the box, one washer in the box, one plastic plate
）
•
Screws
➀
Screw A furnished with the Desk
➁
Screw A furnished with the Desk
➂
Screw A furnished with the Desk
➃
When setting the machine on the Desk, use the screw B in the box.
When setting the paper feeder unit on the Desk, use the screw C in the box with
the washer.
➄
Screw C furnished with the Desk
➅
Screw C furnished with the Desk
Fix the plastic plate with screw of
➃
to
➅
.
With the wrench (1031-7809-01), adjust the
height of the adjusters (front and back) to
stabilize the unit on the floor.
*
The wrench is not enclosed.
CAUTION
Be sure to set the adjusters as specified.
Failure to set the adjusters correctly may
cause the unit to become unbalanced and
fall, possibly resulting in serious injuries.
C4619U001AA
0000U008AA
4682IXC002DA
4682IXC003DA
4682IXC004DC
➁
➂
➃
➄
➅
➀
Plastic Plate
4682-7771-01E.fm 2 ページ ２００５年２月２５日 金曜日 午前８時２８分