Konica Minolta DK-701, Руководство по установке, Страница: 2 / 3

DK-701/DK-702/DK-703
– 1 –
■ Unpacking
1. Check that the following accessories are available in the box.
■ Installing the Adjusters
1. Using one screw for each stabilizers, attach the two stabilizers to the desk at the
positions shown in the illustration below (one screw D furnished with the Desk).
2. Attach the two adjusters to the desk at the positions shown in the illustration at the left.
1. Desk ...................................................................................................... 1
2. Guide Plate............................................................................................ 2
3. Adjusters................................................................................................ 2
4. Plastic Plate........................................................................................... 1
5. Screw A (4 × 8 mm) .............................................................................. 3
6. Screw B* (4 × 10 mm) (May or may not be used.) ................................ 1
7. Screw C (3 × 8 mm) (May or may not be used.).................................... 3
8. Screw D (4 × 10 mm) ............................................................................ 2
9. Washer (May or may not be used.) ....................................................... 1
10. Installation Manual (this manual) ........................................................... 1
* Not included in DK-702/DK-703
1
4021U050AA
2
3
4619U002AA
4619U005AA
4
5
6
7
8
4021U071AA
4021U072AA 4021U073AA 4021U074AA 4021U075AA
9
4682U001AA
10
4980U021AA
4682IXC005DA
<DK-701>
<DK-703>
4682IXC006DA
<DK-702>
Stabilizers
Adjusters
4682IXC001DA
4682-7771-01E.fm 1 ページ ２００５年２月２５日 金曜日 午前８時２８分