Konica Minolta CM-3700A-U, Инструкция по эксплуатации

Страница: 14 / 36

12
Measurement Procedure
c This manual explains how to prepare the CM-3700A-U and how to set a specimen.
c The CM-3700A-U is controlled by a PC to perform measurements.
c For a description of measuring method using SpectraMagic™ NX
(optional), refer to the SpectraMagic™ NX instruction manual.
Flow of Preparation and Measurement
Connecting the PC
Connect the CM-3700A-U to the PC
with the USB cable. (P.13)
Connecting the AC adapter
Connect the CM-3700A-U to the AC outlet
with the AC adapter. (P.14)
Starting the PC
(starting Windows)
Turn on the PC to be used to control the CM-3700A-U.
Starting the software Start the software and set it for control of the CM-3700A-U.
Turning the power ON Turn the power ON. (P.15)
Attaching a calibration
target mask
Attach the target mask (CM-A91) for calibration. (P.16)
Performing zero calibration
Position the zero calibration box and
perform zero calibration. (P.19)
Performing white calibration
Position the white calibration plate and
perform white calibration. (P.20)
Attaching a measurement
target mask
Attaching an appropriate measurement target mask.
Positioning a specimen Position the specimen on / in the CM-3700A-U. (P.21)
Performing measurement Perform measurements.
Turning the power OFF When measurements are complete, turn the power OFF. (P.15)