Konica Minolta bizhub Press 1250P, Руководство пользователя

Страница: 14 / 202

Saddle Stitcher SD-513 2-5
2.1 Machine Configuration 2
External view of Saddle Stitcher SD-513
No. Name Description
1 Saddle stitcher front door Opens to allow removal of mishandled paper.
2 Slit scrap box door When the optional Trimmer Unit TU-503 is mounted,
opened for removal of slitting scraps in the slit scrap
box .
3 Trim scrap tray Withdrawn for removal of fore-edge trimmings in the
trim scrap box .
4 Clamp section upper door Opened for removal of mishandled paper inside the
folding unit, and for cleaning the conveyance belts.
5 Clamp section Opened for removal of mishandled paper inside the
fold conveyance section, fold & staple section, or half-
fold section. Open the saddle stitcher front door to ac-
cess the clamp section.
6 Clamp section handle Hold the lock release lever while opening the clamp
section . Hold the lock release lever while closing the
clamp section.
7 Folding outlet door Opened for removal of mishandled paper inside the
folding outlet.
8 Stopper Prevents output sheets from falling off the bundle exit
tray .
9 Bundle exit tray extension Opened for delivery of output sheets onto the bundle
exit tray .
10 Secondary (sub) tray Holds output sheets that are delivered from the equip-
ment attached to the right side of the machine without
being processed in Fold & Staple, Multi Half-Fold, or
Multi Tri-Fold mode. Also holds output delivered after
performing creasing or 2-side slitting using
Trimmer
Unit TU-503 or Creaser Unit CR-101 .
11 Paper detection sensor Detects output sheets delivered on the conveyance
belt to prevent from falling off.
12 Tri-fold tray Holds sets output in Tri-Fold mode.
13 Conveyance belt Carries output sheets leftward.
14 Bundle exit tray Holds fold & stapled or half-folded sets processed by
the machine.
15 Bundle exit tray outlet Delivers fold & stapled or half-folded sets processed
by the machine.
16 Output roller Straightens fold & stapled or half-folded sets pro-
cessed by the machine.