Konica Minolta bizhub C224, Руководство пользователя

Страница: 193 / 195

bizhub C554/C454/C364/C284/C224 4-35
4.5 HDD Backup Utility 4
6
Type the Administrator Password registered in the machine in the "Administrator Password" box.
% If the "Save the administrator password" check box is selected, the Administrator Password en-
tered is stored in the PC being used. If you do not want the Administrator Password stored, clear
the "Save the administrator password" check box.
7
Click [Next].
% If a wrong Administrator Password is entered, a message that tells that the Administrator Password
does not match appears. Enter the correct Administrator Password.
% If the Enhanced Security mode is set to [ON], entry of a wrong password is counted as unauthorized
access. If a wrong Administrator Password is entered a predetermined number of times (once to
three times) or more set by the Administrator of the machine, a message appears that tells that the
machine accepts no more Administrator Passwords because of unauthorized access for any sub-
sequent entry of the Administrator Password. The machine is then set into an access lock state.
To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and
then turn on, the main power switch of the machine. If the main power switch is turned off and on,
the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the
main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it
off. If there is no wait period between turning the main power switch off, then on again, the machine
may not function properly.
Here is the sequence, through which the main power switch and sub power key are turned on and
off:
Turn off the sub power key
ö Turn off the main power switch ö Turn on the main power switch ö
Turn on the sub power key
8
Check the data that has been set and click [Start].