manualshive.com logo in svg

Konica Minolta AU-201S, Руководство по установке, Страница: 3 / 4

Поделиться
Скачать
Konica Minolta AU-201S Скачать руководство пользователя страница 3

E-3

(9) Attach the working table to the main body.

Note:

For the installation procedure, see the working 
table installation manual.

(10) Attach the cable clamp onto the position shown 

in the illustration.

Note:

The cable clamp is supplied with the working 
table.

(11) Open the upper rear right door.

(12) Connect the USB cable to the main body.

Note:

Connect it to either of the two ports.

(13) Fit the USB cable into the two cable guides. 

Pull the USB cable up in order to remove slack.

(14) Route the USB cable through the notch of the 

upper rear right door and close the door.

(15) Route the USB cable as shown in the illustra-

tion.
Route the USB cable through the four wire sad-
dles and the cable clamp.

Note:

Arrange the cable so that it does not interfere with 
opening or closing of the right door.

 Port

Содержание AU-201S

Страница 1: ...ion manual of the mount kit for informa tion on the installation procedure This manual provides the illustrations of the accessory parts and machine that may be slightly different in shape from yours In that case instead of the illustrations use the appearance of your machine to follow the installation procedure This does not cause any significant change or problem with the proce dure No Name Shap...

Страница 2: ...he working table Three screws Note The cushion cable tie and authentication label are contained inside the cover 5 Paste the cushion to the cover aligning the cushion with the line marked inside the cover Note The cushion is supplied with the working table 6 Position the authentication unit aligning its four corners with the four marks indicated on the underside of the working table 7 Secure the a...

Страница 3: ... Connect the USB cable to the main body Note Connect it to either of the two ports 13 Fit the USB cable into the two cable guides Pull the USB cable up in order to remove slack 14 Route the USB cable through the notch of the upper rear right door and close the door 15 Route the USB cable as shown in the illustra tion Route the USB cable through the four wire sad dles and the cable clamp Note Arran...

Страница 4: ...d press Start key to install the data 7 Check that the data are normally installed from the message that appears on the control panel 8 Turn OFF the power switch 9 Remove the USB memory 10 Turn ON the power switch Note When displayed the Service Mode screen be sure to turn off the power after exiting the Service Mode screen and wait for 10 seconds or more before turning on Setting IC card authenti...

Отзывы:

Нет отзывов