Konica Minolta AccurioPress 6120, Краткое руководство

Страница: 26 / 36

26
7. Measure the gap between the front
and back side at each point of [a] to
[d] on the [back]
side of printed chart
to acquire the
adjustment data.
✓ The figure shows
an example to
measure [a]. the
scale resolution is
0.5mm
✓ The black lines in
the figure indicate
the front side and
the blue lines
indicate the back side.
✓ You can enter a value in
0.1mm increments
✓ For example, when [a]
scale is misaligned upward
1.5mm from the one on the
front side as shown in the
figure, press in order of [1]
[5][+/-] and enter -1.5 to
correct and move
downward the
blue line on he
back side by
1.5mm
✓ When you count
the number of
marks, you can
confirm which
paper tray was
selected for print.
7. 量度測試表背面[a]到[d]各點和前面影像
的偏差
值
.
✓ 圖解中是[a]點的例
子，每條尺度代表
0.5mm
✓ 圖解中的黑線尺度代表
前面， 藍線代表背面
✓ 可輸入以0.1mm
為
單
位的準確度
✓ 圖解中,背面[a]點的影
像(藍線)和前面[a]點
影像(黑線)的差距高出
了1.5mm
✓ 測試表中 符號的數量
代表選取的紙盤
Tray Setting 紙盤設定
B o th Side Adjustmen t
G ap Adjustment ( Part2 )
兩面調整
間隙調整
(
第二部份
)