manualshive.com logo in svg

Konica Minolta 9880, Руководство пользователя, Страница: 182 / 255

Поделиться
Скачать
Konica Minolta 9880 Скачать руководство пользователя страница 182

|

KONICA FAX 9880/9980

182

Department Code

Speed access no. 06

This is a 4-digit numeric password that must be entered to use
the machine when it is set in the Department Code mode.

Up to 99 Department Codes can be registered at one time.

The Department Code is also known as the Restricted Access
ID.

!

User Function 19 (Department Code) must be set to ON
before the Department Code may be set.

!

Be sure to record all Department Codes.  Keep the
record in a safe place.  If you forget a Department Code,
you will need to contact an Authorized Service
Representative for assistance.

!

For a record of the Department Codes, print the Activity
Report or the Message Confirmation Report.

Department codes are listed on each report in the
column D.Code.  Refer to “Reports.”

Содержание 9880
































































































































































































































































Отзывы:

Нет отзывов