Konica Minolta 9880 Скачать руководство пользователя страница 178

Страница: 178 / 255

KONICA FAX 9880/9980

178

Pulse Dial Rate

This setting can only be changed by your Authorized
Service Representative.

Speed Access no. 46

If the machine is set to Dial Pulse, this function controls the
rate of the dialing pulses (which vary by country).

Available settings are 10, 16 and 20 pps.

The default setting is MF (Modulated Frequencies).

See “Setting Basic Features, Dial and Incoming Call
Parameter Settings.”

Pulse Make Ratio

This setting can only be changed by an Authorized
Service Technician.

Speed access no. 47

If the machine is set to Dial Pulse, this function controls the
make rate of the dialing pulses.

Available settings are 33, 39 and 40%.

The default setting is 39.

Pulse Dial Type

This setting can only be changed by an Authorized
Service Technician.

Speed access no. 48

If the machine is set to Dial Pulse, this function controls the
type of pulse dialing it uses. Types of pulse dialing vary by
country.

Available settings are N, 10-N and N+1.

The default setting is N.

Содержание 9880
































































































































































































































































Результаты поиска

Содержание 9880

Отзывы:

Konica Minolta 9880, Руководство пользователя, Страница: 178 / 255

Результаты поиска

Содержание 9880

Отзывы: