Kongskilde VIBRO MASTER 3000, Руководство пользователя

Страница: 7 / 25

7
Attention!
The driving behaviour of the tractor changes.
Suit your driving according to the conditions of the street.
Pay special attention to the centre of gravity of hydraulic foldable machines.
Do not exceed a speed of 25 km/h when transporting Vibro Master 3000 on the road.
Before driving
−
Observe admissible axle loads, total weights and transport measurements.
−
For transportation on any public road, track or place, the legal transport width
according to local rules should not be exceeded. If the transport width is
exceeded, a special authorisation may be obtained under certain conditions from
the appropriate authorities.
−
Road behaviour, performance, ability to steer and brake are influenced by
attached or coupled implements and ballast weights. Ensure that there is
sufficient ability to steer and brake.
−
Before starting off the Vibro Master 3000, check the immediate area. Pay special
attention to children and that there is sufficient visibility.
−
For road transportation with the implement raised, lock the control valves of the
tractor.
−
Make sure that wing security locks are correctly locked.
NOTE:
The security locking devices prevents from accidental unfolding in case of a defect in
the hydraulic hoses. However, it may not prevent unintentional unfolding or lowering
if the control device is operated by mistake.
During transportation
−
Riding on the implement during work and transport is not permitted.
−
Never leave the driver's cab during transportation.
−
When driving around corners and bends take the extra width and the inertia of the
Vibro Master 3000 as well as the high centre of gravity of the folded frame into
consideration.
After transportation
−
Before leaving the tractor, set the implement down onto the ground, switch engine
off, remove ignition key and apply hand brake.
−
No one should stand between tractor and implement without securing the vehicle
by the hand brake and/or stop chocks.
−
Foldable frame parts should be completely unfolded. The implement must only be
parked with unfolded frame parts.