Kongsberg Simrad ST90, Справочное руководство

Страница: 247 / 690

442704/A
245
h To re-establish contact, use the following URL in your
browser:
157.237.60.xx:5000
i Select
Sonar PCs Configuration
on the top menu to open the page.
j Obtain the IP address.
k Type or copy the IP address into the relevant box.
l Obtain the MAC address.
m Type or copy the MAC address into the relevant box.
n Select
ADD Sonar PC
.
o Observe that your Processor Unit is added to the list.
p Close the web browser.
4 Make sure that each Operating Panel is functional.
a Make sure that the blue indicator is lit, and check that you can move the cursor
on the screen.
b On the Processor Unit desktop, double-click the ST90 icon to start the program.
Wait until the ST90 system operates normally.
c Make sure that you can control the cursor, and that you can make selections in
the menu system.
d Press and/or turn selected buttons, and make sure that the corresponding function
is activated in the user interface.
Related topics
Maintenance procedures, page 186
Installing and maintaining software, page 230
Using a single Operating Panel to control more than one sonar
(Mk2)
Since the Mk2 Operating Panel uses Ethernet to communicate with the Processor Unit, you
can use one single panel to control more than one sonar system.
Prerequisites
The Operating Panel is installed as specified in the Installation manual . The Processor Unit
is turned on. The following specific items are required for this task:
• Computer mouse
• Computer keyboard
Maintenance procedures