Kongsberg Simrad ST90, Справочное руководство

Страница: 241 / 690

442704/A
239
ST90
157.237.60.14
AC:1F:6B:1D:42:E6
If the text file is missing you must find the information manually. We suggest that you do
this, and create the necessary folder and txt file before you start the setup process. See
step 1 in the procedure.
Note
If the Operating Panel fails to establish contact with the Processor Unit it will time out and
switch itself off after two minutes. When this happens the blue indicator light stops flashing.
Procedure
If required, locate the IP and MAC addresses on the ETH1 Ethernet adapter in the Processor
Unit.
1 Obtain the IP address.
The IP and MAC addresses for your Processor Unit are contained in a text file named
IPandMACaddress.txt
. If the text file is missing you must find the information
manually.
a In the bottom-left corner of your desktop, select the Windows ®
Start
button.
b On the menu, select
Settings
.
c Observe that the
Windows Settings
dialog box opens.
d Select
Network & Internet
.
e Select
Change adapter options
.
f Select the relevant network adapter, then right-click and select
Properties
on the
short-cut menu.
g On the list of connections, select
Internet Protocol 4 (TCP/IPv4)
, and then
Properties
.
h Observe the IP address for the Ethernet adapter.
i Write down the information.
j Close all the dialog boxes.
Obtain the MAC address.
a In the bottom left corner of your desktop, select the looking glass to start a search.
b Type "Command", do the search, and open the
Command Prompt
window.
c Type
ipconfig /all
and press the
Enter
key.
Maintenance procedures