Kongsberg Simrad CP200-5C, Руководство по установке, Страница: 61 / 110

484164/A
59
• Do not step on the transducer cable.
• Do not damage the transducer cable.Avoid exposure to sharp objects.
Procedure
1 Determine the physical location of the transducer.
The decision must be based on:
• The vessel drawings
• The shape and properties of the hull
Make sure that all possible considerations are made to reduce noise.
2 Based on the shape of the transducer housing, and the mounting devices available,
determine the installation method.
3 Design, manufacture and mount the necessary fairing, installation blister, keel box
and/or tank that is required to mount the transducer.
4 Install the bushing.
5 Design, manufacture and mount the steel conduit for the transducer cable.
6 Unpack the transducer from its transport crate.
7 Position the transducer under the mounting location.
8 Pull the transducer cable up through the steel conduit.
9 Tighten the packing nipple on the cable gland properly to avoid leaks.
10 Mount the transducer.
11 Seal the top of the steel conduit to prevent water leaks.
12 Connect the transducer cable to the transceiver.
13 If your vessel will operate in waters with a lot of marine growth, consider applying
a thin layer of anti-fouling paint to the transducer face.
Topics
Using a suitable inclination angle, page 60
Smooth surface is important, page 60
Using self-locking taps, page 61
Installing the transducer